• 60/40 is 60% tin and 40% lead
• For use on copper foil seams and lead came seams
• Melting temperature: 361° – 376°F.
• Sold in a convenient 1lb (450g) spool 1Lb Roll (ONE POUND)
• Offers superior flow
• The traditional stained-glass solder meeting ASTM specs
• Contains 50% Lead and 50% Tin for a very strong soldered joint
• Solder reel: 55mm (2 11/64″) diameter
• Reel core: 25.5mm (1″) diameter
• Solid wire: 3.175mm (1/8″) diameter
• Melts at 361 degrees – 421 degreesF

 Canfield 60/40 Solder – SDS.pdf

Glass artists need a very specific mix of alloys in their solder to get a smooth and clean bead on their work. Anything else is difficult and sometimes impossible to work with. 60/40 stays in a liquid stage longer, giving you more time to produce smooth solder seams. It also melts at a lower temperature than 50/50 and is popular among beginners as well as experienced crafters. Convenient 1 lb. spools. 60% TIN / 40% LEAD STAINED GLASS SOLDER: For use on copper foil seams and lead came seams. Offers superior flow over 50/50 with more flow per inch than 50/50. Melting temperature: 361 – 376F.

 

Weight(g) 471.000000

Brand SRA

Solder Type

Solder MPNSC-SRA-WB-CAN-5050-125

 

  Glass artists need a very specific mix of alloys in their solder to get a smooth and clean bead on their work.   Sold in a convenient 1 lb. spool. This contains 60% Tin and 40% Lead for use on copper foil seams and lead came seams  This is a 1/8 diameter solid wire which melts at 361° – 376°F

 

 

 This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to