Geberit 2×6 Toilet Carrier and Actuator Plate White Geberit

Includes 111.335.00.5 and 115.770.11.5 White

The Geberit concealed installation system – also known as an in-wall carrier – allows you to design and create the bathroom of your dreams. In-wall carrier systems allow designers to create eye-catching new bathrooms from the bare minimum without expensive structural work. The frame system can be used in the tightest of spaces including corners, allowing designers the freedom to create stunning bathrooms without compromise. Because the carrier includes an integral water tank located behind the wall, the resultant aesthetic is a clean and modern finish with no visible pipe work. Only the attractive decorative actuator plate attached to wall remains visible.

• Works with Many Brands including: Kohler, Duravit, Toto, etc.
• Must use Geberit actuator / Finish Plate (not included as there are several finish / Style options available)
• Provides clean and modern finish with no visible pipe work
• For installation in wood or steel stud walls that provide support equal to 2-inch by 6-inch (5.5-inch) depth
• For 2-hole wall-hung wash-down WC with 7.1-inch or 9.1-inch fastening distance
• Fits 15-inch to 19-inch toilet heights
• 1.6 GPF, supports up to 880 pounds

Other features and specifications:

• Duofix carrier installation frame for wall-hung washdown WC with UP320 concealed dual-flush tank, height 47 in (120 cm).
• For installation of UP320 concealed flush tanks for wall-hung washdown WC
• For installation in wood or steel stud walls that provide support equal to 2″x 6″ (5.5″) depth
• For dual flush
• For room wall or preWall construction covered with panels (gypsum or wood)
• For installation in front of a solid or drywall
• For installation in room-height preWall or partition wall
• For a floor construction of 0 – 4 in (0 – 10 cm)
• For 2-hole wall-hung washdown WC with fastening distance 7.1 in (18 cm) or 9.1 in (23 cm)
• For WC with dual flush low-consumption flushing volume of 1.6 / 0.8 GPF (6 / 3 LPF)
• Water supply connection at centre back or at the top
• Concealed cistern for tool-free mounting and repair work
• Self-locking feet for tool-free alignment of the element
• Feet galvanized, infinitely adjustable 0 – 4 in (0 – 10 cm)
• Concealed cistern fully insulated against condensation
• Fill valve flow rate at 7 psi (0.5 bar): 1.1 gpm (0.07 l/s)
• Fill valve flow rate at 43 psi (3 bar): 3.0 gpm (0.19 l/s)
• Flush volume: 1.6/0.8 GPF (6/3 LPF)
• Fill valve operating pressure range: 1 – 145 psi (0.1 – 10 bar)
• Fill valve max. fluid temp: 77 °F (25 °C)
• Tank and frame, water supply and drainage elbow
• 2 threaded rods M12 for ceramics fastening
• Impuls380 fill valve
• Fastening material

Specifications sheet

Installation guide